DK Detachable Teeth Sprockets

Any harm over the teeth surfaces of a sprocket diminishes the existence with the conveyor chain.
With standard sprockets, considerably worn sprocket teeth have been repaired by teeth padding or the whole sprocket was replaced. In both case, restore was pricey and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our buyers to the dramatic cost savings in value and time.
The teeth is often replaced by two techniques: individual tooth replacement or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on on the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the proper.
The over photo and the best suitable illustration show a sprocket for person tooth replacement. Since the joint encounter concerning the replaced teeth as well as sprocket is formed in the unique arc, the bonding accuracy is large along with the sprocket power is enhanced. Moreover, because the load acting about the mounting bolts is decreased, there may be significantly less probability of loosening. This sprocket development is patented.
You will find two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for large sprockets acquiring hefty loads and welded sheet steel hubs for other applications.