Standard Description
Equipped with all the zero leak bidirectional checking sole-noid valves, this power unit is developed to the operation of two independent circuits. Which are respectively for that main and subordinate platforms on the double scissors lift. Two cut-off valves are used for reducing the machine manually in case of energy reduction. If a lot more independent circuits are expected for the application please get hold of us for availability.
Remark: one. Please consult our product sales engineer for that different pump displacement, motor electrical power or tank capacity.
two. CSA or UL licensed motors can be found on request.
Special Notes
one. The AC motor is of S3 duty cycle, which might only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic parts concerned prior to installation of the power unit.
three. Viscosity with the oil shoud be 15~46 cst,plus the oil really should be clean and absolutely free of impurities,N46 hydraulic oil is advised.
four. The electrical power unit should be mounted vertically.
five. Check the oil degree during the tank immediately after the first operating of the energy unit.
6. Oil changing is needed soon after the original a hundred operation hrs,afterwards the moment every 3000 hrs.