Tag Archives: shaft steel

China wholesaler Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling hrc coupling

Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

 

Company Profile

 

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

 

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

 

Standard Or Nonstandard: Standard
Shaft Hole: 19-32
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Flexible
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

China wholesaler Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc coupling

hrc coupling

Can HRC Couplings Accommodate High Torque and High-Speed Applications?

HRC (Highly Resilient Coupling) couplings are designed to handle a wide range of torque and speed requirements, making them suitable for various industrial applications, including those involving high torque and high-speed conditions. Their ability to accommodate high torque and high-speed applications depends on several factors:

  • Coupling Size and Type: HRC couplings come in various sizes and types, each with its torque and speed ratings. Larger couplings with robust designs can handle higher torque and speed than smaller ones.
  • Material Composition: HRC couplings consist of a metal hub and a flexible elastomeric element. The material composition of the elastomer plays a significant role in determining the coupling’s torque and speed capabilities.
  • Elastomer Properties: The elastomeric element in HRC couplings provides flexibility and damping. It should be selected based on its resilience, durability, and ability to withstand the intended torque and speed requirements.
  • Application Requirements: The coupling’s torque and speed ratings must match or exceed the demands of the application. Factors such as the driven and driving equipment’s power, load characteristics, and operational conditions should be considered.
  • Proper Installation: Correct installation, including accurate alignment and proper torqueing of the coupling, ensures optimal performance and minimizes the risk of premature failure in high torque and speed applications.

It’s important to consult the manufacturer’s specifications and guidelines to select the appropriate HRC coupling for a specific high torque and high-speed application. Using an undersized or unsuitable coupling can lead to premature wear, reduced efficiency, and potential safety hazards.

In summary, HRC couplings are well-suited for high torque and high-speed applications when properly selected, installed, and maintained. They offer the benefits of damping vibrations, shock absorption, and misalignment compensation while reliably transmitting power in demanding industrial settings.

hrc coupling

What Industries Commonly Use HRC Couplings for Power Transmission?

HRC (Highly Resilient Coupling) couplings are widely used in various industries for power transmission applications. Some of the common industries where HRC couplings are utilized include:

1. Manufacturing Industry: HRC couplings are extensively used in manufacturing plants for powering various machinery such as conveyor systems, pumps, compressors, fans, and machine tools. Their ability to dampen vibrations and accommodate misalignment makes them suitable for a range of manufacturing processes.

2. Petrochemical Industry: The petrochemical industry often employs HRC couplings in pumps, blowers, and agitators used for processing and transporting various chemicals and petrochemical products. These couplings help ensure smooth power transmission and protect equipment from shocks and vibrations.

3. Mining Industry: In the mining sector, HRC couplings are used in crushers, mills, conveyor belts, and other heavy-duty equipment. They are chosen for their durability and ability to handle high torque loads, which are common in mining operations.

4. Water and Wastewater Treatment: Water treatment plants and wastewater facilities utilize HRC couplings in pumps, mixers, and aerators to efficiently move and treat water and sewage. The couplings’ shock absorption capability helps reduce wear and tear on the equipment.

5. Power Generation: Power plants, both conventional and renewable, often use HRC couplings in generators, turbines, cooling tower fans, and other critical equipment. The couplings’ ability to handle high torque and dampen vibrations is beneficial in power generation applications.

6. Paper and Pulp Industry: In paper mills and pulp processing facilities, HRC couplings are employed in various stages of the manufacturing process, including pumps, agitators, and roll drives. They contribute to efficient power transmission and minimize downtime.

7. Steel and Metal Industry: The steel and metal processing industry relies on HRC couplings in rolling mills, furnaces, and other heavy machinery. These couplings assist in transmitting power effectively while absorbing shock loads and accommodating misalignment.

These are just a few examples, and HRC couplings find applications in numerous other industries, such as food and beverage, automotive, chemical, and construction, where reliable power transmission and protection of connected equipment are essential.

hrc coupling

Explanation of HRC Coupling and Its Functionality

An HRC coupling, also known as a “Highly Resilient Coupling” or “Jaw Coupling,” is a type of flexible shaft coupling used to connect two shafts in mechanical power transmission systems. It is designed to transmit torque while accommodating minor shaft misalignments and dampening vibrations.

How HRC Coupling Works:

The HRC coupling consists of three main components:

  1. Two Hubs: Each hub has a set of curved jaws with teeth that mesh together when the coupling is assembled. The hubs are typically made of steel or cast iron and are connected to the respective shafts of the driving and driven equipment.

  2. Elastomeric Spider: The elastomeric spider is the flexible element of the coupling and is placed between the two hubs. It is commonly made of a synthetic rubber material such as polyurethane. The spider’s unique design allows it to deform under torque, transmitting power while accommodating angular and parallel misalignments between the shafts.

When the HRC coupling is in operation, the driving shaft rotates, and the torque is transmitted through the hubs to the elastomeric spider. As the spider deforms, the jaws of the hubs move relative to each other, accommodating any misalignment between the shafts. This flexibility helps to reduce the transmission of vibrations and shock loads from one shaft to the other, thus protecting the connected equipment.

HRC couplings are widely used in various applications, including pumps, compressors, conveyors, and other machinery, where misalignment and shock absorption are important considerations. Their simple and effective design makes them easy to install and maintain, and they are available in various sizes and torque ratings to suit different power transmission requirements.

China wholesaler Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc couplingChina wholesaler Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc coupling
editor by CX 2023-11-30

China Best Sales Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC hrc coupling

Product Description

Product Description

Chain coupling is composed by a duplex roller chain and 2 sprockets. The function of connection and detachment is done by the joint of chain. It has the characteristic of simplicity, high efficiency, easy – on and easy-off and nice out-look.
It also has a aluminium cover to prevent dust and protect the lubricant and make the life of chain coupling a long – lasting one

Detailed Photos

 

Product Parameters

 

 

Our Advantages

Company advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.

Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.

With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.

WHY CHOOSE US

Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.

Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets

Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.

FAQ

Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.

Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.

Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.

Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.

 

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Bore Diameter: 6mm
Speed: 4000r/M
Structure: Flexible
Material: Cast Steel
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

China Best Sales Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC  hrc coupling

hrc coupling

How do HRC Couplings Compare to Other Types of Couplings in Terms of Performance?

HRC (Highly Resilient Coupling) couplings offer specific advantages and disadvantages compared to other types of couplings, making them suitable for certain applications while not ideal for others. Here is a comparison of HRC couplings with some other common coupling types:

  • HRC Couplings vs. Flexible Couplings: HRC couplings and flexible couplings both provide some degree of misalignment compensation and damping of vibrations. However, flexible couplings typically offer higher torsional flexibility and better misalignment accommodation than HRC couplings. HRC couplings may have limitations in terms of angular and parallel misalignment compared to certain types of flexible couplings.
  • HRC Couplings vs. Gear Couplings: Gear couplings are more robust and can handle higher torque capacities than HRC couplings. They are suitable for heavy-duty applications that demand higher torque transmission and greater misalignment accommodation. However, gear couplings may be more expensive and less forgiving in case of misalignment.
  • HRC Couplings vs. Disc Couplings: Disc couplings offer excellent misalignment compensation and torsional stiffness. They can handle high-speed applications and provide precise torque transmission. However, disc couplings are generally more expensive than HRC couplings and may require more frequent maintenance.
  • HRC Couplings vs. Jaw Couplings: Jaw couplings are simple and cost-effective but offer limited misalignment accommodation compared to HRC couplings. They are suitable for light to moderate loads and lower torque applications.

Ultimately, the choice of coupling type depends on the specific requirements of the application. HRC couplings are well-suited for applications where moderate misalignment compensation is needed, and cost-effectiveness is a consideration. They are commonly used in pumps, compressors, conveyor systems, and other industrial machinery.

When selecting a coupling, factors such as torque capacity, speed, misalignment requirements, environmental conditions, and maintenance considerations should be taken into account. It is essential to consult with coupling manufacturers or engineering experts to ensure the appropriate coupling is chosen for optimal performance and reliability in the given application.

hrc coupling

What Role Does an HRC Coupling Play in Reducing Downtime and Maintenance Costs?

An HRC (Highly Resilient Coupling) plays a significant role in reducing downtime and maintenance costs in mechanical systems. Here’s how:

1. Vibration Damping: HRC couplings are designed with a flexible rubber element that acts as a vibration damper. The rubber element absorbs and dampens vibrations generated during the operation of rotating machinery. By reducing vibrations, the coupling helps prevent excessive wear and fatigue on connected equipment, such as motors, pumps, and gearboxes. This leads to less frequent breakdowns and extends the lifespan of components, ultimately reducing downtime for repairs and replacements.

2. Misalignment Compensation: As mentioned earlier, HRC couplings can handle various types of misalignment, including angular, parallel, and axial misalignment. By accommodating these misalignments, the coupling helps prevent additional stress on the connected shafts and bearings. The ability to handle misalignment reduces the likelihood of premature failures and breakdowns caused by misalignment-related issues.

3. Shock Load Absorption: In many industrial applications, rotating machinery may experience sudden shock loads due to various factors like sudden starts, stops, or changes in load. The flexible rubber element in the HRC coupling acts as a shock absorber, cushioning the impact of these sudden loads. By absorbing shock loads, the coupling protects the connected equipment from damage and minimizes the risk of unexpected downtime due to shock-related failures.

4. Easy Installation and Maintenance: HRC couplings are relatively easy to install and maintain. They do not require complex alignment procedures, and the flexible element eliminates the need for lubrication. The simple design and ease of maintenance contribute to reducing the time required for installation and upkeep, thus lowering overall maintenance costs.

5. Cost-Effective Design: HRC couplings are cost-effective compared to some other types of couplings. They provide reliable performance and durability at a reasonable price point. The cost-effectiveness of HRC couplings makes them a popular choice in various industrial applications where reducing operational costs is a priority.

Overall, the HRC coupling’s ability to dampen vibrations, compensate for misalignment, absorb shock loads, and offer easy installation and maintenance translates into improved reliability and efficiency of mechanical systems. This, in turn, leads to reduced downtime and maintenance costs, making HRC couplings a valuable component in power transmission applications across industries.

hrc coupling

Advantages of Using HRC Couplings in Mechanical Systems

1. Flexibility: HRC couplings offer flexibility in accommodating misalignment between shafts, both angular and parallel. This flexibility helps to reduce stress on the connected equipment and increases the overall reliability of the system.

2. Vibration Damping: The elastomeric spider in HRC couplings acts as a cushion, absorbing vibrations and shock loads, which results in smoother and quieter operation of the machinery.

3. Simple Design: HRC couplings have a straightforward design, consisting of just two hubs and an elastomeric spider. This simplicity makes them easy to install, assemble, and maintain.

4. Cost-Effective: Compared to some other types of couplings, HRC couplings are cost-effective, providing reliable performance at a relatively lower cost.

5. High Torque Transmission: HRC couplings can handle high torque transmission, making them suitable for various heavy-duty applications.

6. Misalignment Compensation: They can compensate for small amounts of misalignment between shafts, which can occur due to factors like thermal expansion or shaft deflection.

7. Corrosion Resistance: The elastomeric spider in HRC couplings provides some level of corrosion resistance, making them suitable for applications in harsh environments.

8. Wide Range of Sizes and Torque Ratings: HRC couplings are available in various sizes and torque ratings, making it easy to find a suitable coupling for different power transmission requirements.

9. Electrically Insulating: Some HRC couplings are electrically insulating, which can be advantageous in certain applications to prevent electrical currents from passing between connected shafts.

10. Reduced Downtime: Due to their ability to absorb shock loads and vibrations, HRC couplings can help reduce wear and tear on machinery, leading to less downtime and lower maintenance costs.

Overall, HRC couplings are a reliable and widely used choice for connecting shafts in mechanical systems, providing flexibility, vibration dampening, and cost-effectiveness in a wide range of applications.

China Best Sales Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC  hrc couplingChina Best Sales Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC  hrc coupling
editor by CX 2023-10-23

China Professional Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling hrc coupling

Product Description

High Demand Custom Aluminum Precise Milling Spare Lathe Machining Cnc Machine Parts

Product Description

1. Precision CNC machining parts strictly follow customers’ drawing, packing, and quality requirements.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers; 

Detailed Photos

 

Product Parameters

Our advantage of cnc machining:

Business Type Beyond the Manufacturer and strong organized ability in the industrial
Benefits 1. Deeper industrial experience at CNC machining parts service for more than 10-years,our customer’s requirement is our 1st priority.
2. 2D or 3D files is available;
3. We trust the quality priority and we insist the good quality should be based on the customers’ satisfied;
4. Without any MOQ requirement;
5.Faster delivery time;
6. Customized size and specification /OEM available
7. Near ZheJiang Port

The material

 
 Materials Accept
 
Stainless Steel SS201, SS303, SS304, SS316 etc.
Steel Q235, 20#, 45#,
Brass C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37) , C28000(CuZn40)
Iron 1213, 12L14,1215 etc.
Bronze C51000, C52100, C54400, etc.
Aluminum Al6061, Al6063,AL7075,AL5052 etc
Plastic ABS,POM,PC(Poly-Carbonate),PC+GF,PA(nylon),PA+GF,
PMMA(acrylic)PEEK,PEI etc)

Packaging & Shipping

 

  1. We prefer DHL or TNT express or other air freight between 1kg-100kg.
  2. we prefer sea freight more than 100kg or more than 1CBM
  3. As per customized specifications.

 

Company Profile

About us
HangZhou CHINAMFG Technology Co.,Ltd is located in HangZhou City, ZheJiang  Province, Which closed the ZheJiang .The Emitech Technology is mainly engaged in the CNC Machinery Industrial Service for 15 years. Our Parts are sold to Europe, America, Japan, South Korea and China in various kinds of industrial.At present, Our company has CNC Turning machines and CNC centers and equip with professional quality and testing instruments.We have full OEM Experience from worldwide, providing them with One-stop solutions for a broad range of applications.We look CHINAMFG to cooperating with you!
 

 

Our Advantages

1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers; 

After Sales Service

High Demand Custom Aluminum Precise Milling Spare Lathe Machining Cnc Machine Parts
We usually provide 12 Months repair service. If our duty, we will respond to send the new parts.

Our Service

 

Our Processing CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping,
Surface finish Polishing, sandblasting, Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated,
Tolerance 0.05mm~0.1mm
QC System 100% inspection before shipment
Drawing format CAD / PDF/ DWG/ IGS/ STEP
Packaging Plastic bag/Standard package / Carton or Pallet / As per customized specifications
Payment Terms 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable.
Trade terms EXW, FOB, CIF, As per the customer’s request
Shipment Terms

1)We prefer DHL or TNT express or other air freight between 1kg-100kg.

2) we prefer sea freight more than 100kg or more than 1CBM
3) As per customized specifications.

Note The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment

 

After-sales Service: Repaire
Warranty: Half a Year
Condition: New
Standard: DIN, ASTM, GOST, GB, JIS, ANSI
Customized: Customized
Material: Alloy
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

China Professional Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc coupling

hrc coupling

Can HRC Couplings Handle Misalignment Between Shafts?

HRC (Highly Resilient Coupling) couplings are designed to handle a certain degree of misalignment between shafts, making them suitable for applications where alignment issues may arise. These couplings can accommodate both angular and parallel misalignment to some extent, providing flexibility and resilience in mechanical systems.

The flexibility of HRC couplings is primarily due to their construction, which typically includes a flexible element made of rubber or other elastomeric materials. This flexible element sits between two metal hubs and absorbs misalignment by allowing a certain degree of movement.

There are generally two types of HRC couplings based on their ability to handle misalignment:

  • Single Flex HRC Couplings: These couplings can accommodate angular misalignment but have limited capability to handle parallel misalignment. They are suitable for applications where angular misalignment is more prevalent.
  • Double Flex HRC Couplings: These couplings are designed to handle both angular and parallel misalignment to a greater degree than single flex couplings. They offer increased flexibility and can handle more demanding misalignment conditions.

It is important to note that while HRC couplings can handle misalignment, they do have limits. Excessive misalignment beyond their specified range can lead to premature wear and failure. It is essential to follow the manufacturer’s guidelines and ensure that the coupling is properly installed and aligned to prevent unnecessary stress on the flexible element.

For applications with significant misalignment or where precise alignment is critical, other types of couplings like flexible couplings with elastomeric elements, gear couplings, or disc couplings may be more suitable. Engineers and designers should carefully assess the misalignment requirements of their specific application and choose the appropriate coupling type accordingly.

hrc coupling

How Does an HRC Coupling Handle Angular, Parallel, and Axial Misalignment?

An HRC (Highly Resilient Coupling) is designed to handle various types of misalignment, including angular, parallel, and axial misalignment. The coupling’s unique construction allows it to provide flexibility while transmitting torque between two shafts. Here’s how it handles each type of misalignment:

1. Angular Misalignment: Angular misalignment occurs when the axes of the connected shafts are not perfectly aligned. The HRC coupling can accommodate this misalignment due to its flexible element, typically made of synthetic rubber or polyurethane. The rubber element can bend and flex, allowing the coupling to compensate for slight angular deviations between the shafts. This helps to reduce stress on the connected equipment and the coupling itself.

2. Parallel Misalignment: Parallel misalignment happens when the shafts are not perfectly aligned side by side. The HRC coupling’s rubber element can also tolerate small amounts of parallel misalignment. As the shafts move slightly in parallel, the rubber element flexes to maintain the torque transmission between the shafts. However, excessive parallel misalignment should be avoided to prevent premature wear on the coupling.

3. Axial Misalignment: Axial misalignment occurs when the ends of the shafts move closer together or farther apart. The HRC coupling can accommodate limited axial misalignment, thanks to the elasticity of the rubber element. As the shafts move in the axial direction, the rubber element compresses or expands accordingly, ensuring continuous torque transmission.

It’s essential to note that while HRC couplings are designed to handle misalignment, they have limits. Excessive misalignment can cause premature wear and failure of the coupling. Therefore, it’s crucial to install and align the HRC coupling properly within the recommended tolerances to ensure optimal performance and longevity of the coupling and connected equipment.

hrc coupling

Explanation of Different Types of HRC Coupling Designs

1. HRC Standard Design: The standard or classic HRC coupling design consists of two cast iron hubs with a spider made of an elastomeric material, usually rubber. The hubs have teeth on the inner surface that mesh with the spider, providing torque transmission and flexibility. This design is commonly used in various industrial applications due to its simplicity and cost-effectiveness.

2. HRC Spacer Design: The HRC spacer coupling design is similar to the standard HRC design, but it includes a spacer between the two hubs. The spacer allows for more axial misalignment compensation and can accommodate longer distances between shafts. This design is suitable for applications where additional spacing between the shafts is necessary.

3. HRC Flywheel Design: The HRC flywheel coupling design is specifically used in applications where the coupling is mounted on a flywheel. The design incorporates a flywheel mounting hub on one side and a standard HRC hub on the other side. This allows the coupling to be easily connected to a flywheel for various engine-driven machinery.

4. HRC Taper Lock Design: The HRC taper lock coupling design includes taper lock bushings that enable easy installation and removal of the coupling from the shaft. The hubs have a tapered bore, and the taper lock bushings are inserted into the bore, providing a secure and precise connection to the shaft. This design is commonly used in applications that require frequent coupling removal and reassembly.

5. HRC Brake Drum Design: The HRC brake drum coupling design is used in applications where a brake is required. The design incorporates a brake drum on one of the hubs, allowing the coupling to serve both as a torque transmitting coupling and a brake drum for braking purposes. This design is commonly used in industrial machinery where controlled braking is necessary.

6. HRC Non-Spacer Design: The HRC non-spacer coupling design is similar to the standard HRC design but does not include a spacer. This design is suitable for applications where the shafts are relatively close together, and a spacer is not required for additional misalignment compensation.

7. HRC Stainless Steel Design: The HRC stainless steel coupling design is used in applications where corrosion resistance is essential. The hubs and spider are made of stainless steel, providing better resistance to rust and corrosion. This design is commonly used in industries such as food processing, marine, and pharmaceuticals.

8. HRC Pilot Bore Design: The HRC pilot bore coupling design is supplied with plain bore hubs, allowing the end-users to machine the bore to the required size. This design is beneficial when the shaft sizes are not standard or need to be customized for a specific application.

Overall, these different HRC coupling designs offer flexibility and versatility to suit various power transmission requirements across different industries.

China Professional Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc couplingChina Professional Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc coupling
editor by CX 2023-10-06

China high quality Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling hrc coupling

Product Description

High Demand Custom Aluminum Precise Milling Spare Lathe Machining Cnc Machine Parts

Product Description

1. Precision CNC machining parts strictly follow customers’ drawing, packing, and quality requirements.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers; 

Detailed Photos

 

Product Parameters

Our advantage of cnc machining:

Business Type Beyond the Manufacturer and strong organized ability in the industrial
Benefits 1. Deeper industrial experience at CNC machining parts service for more than 10-years,our customer’s requirement is our 1st priority.
2. 2D or 3D files is available;
3. We trust the quality priority and we insist the good quality should be based on the customers’ satisfied;
4. Without any MOQ requirement;
5.Faster delivery time;
6. Customized size and specification /OEM available
7. Near ZheJiang Port

The material

 
 Materials Accept
 
Stainless Steel SS201, SS303, SS304, SS316 etc.
Steel Q235, 20#, 45#,
Brass C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37) , C28000(CuZn40)
Iron 1213, 12L14,1215 etc.
Bronze C51000, C52100, C54400, etc.
Aluminum Al6061, Al6063,AL7075,AL5052 etc
Plastic ABS,POM,PC(Poly-Carbonate),PC+GF,PA(nylon),PA+GF,
PMMA(acrylic)PEEK,PEI etc)

Packaging & Shipping

 

  1. We prefer DHL or TNT express or other air freight between 1kg-100kg.
  2. we prefer sea freight more than 100kg or more than 1CBM
  3. As per customized specifications.

 

Company Profile

About us
HangZhou CHINAMFG Technology Co.,Ltd is located in HangZhou City, ZheJiang  Province, Which closed the ZheJiang .The Emitech Technology is mainly engaged in the CNC Machinery Industrial Service for 15 years. Our Parts are sold to Europe, America, Japan, South Korea and China in various kinds of industrial.At present, Our company has CNC Turning machines and CNC centers and equip with professional quality and testing instruments.We have full OEM Experience from worldwide, providing them with One-stop solutions for a broad range of applications.We look CHINAMFG to cooperating with you!
 

 

Our Advantages

1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers; 

After Sales Service

High Demand Custom Aluminum Precise Milling Spare Lathe Machining Cnc Machine Parts
We usually provide 12 Months repair service. If our duty, we will respond to send the new parts.

Our Service

 

Our Processing CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping,
Surface finish Polishing, sandblasting, Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated,
Tolerance 0.05mm~0.1mm
QC System 100% inspection before shipment
Drawing format CAD / PDF/ DWG/ IGS/ STEP
Packaging Plastic bag/Standard package / Carton or Pallet / As per customized specifications
Payment Terms 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable.
Trade terms EXW, FOB, CIF, As per the customer’s request
Shipment Terms

1)We prefer DHL or TNT express or other air freight between 1kg-100kg.

2) we prefer sea freight more than 100kg or more than 1CBM
3) As per customized specifications.

Note The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment

 

After-sales Service: Repaire
Warranty: Half a Year
Condition: New
Standard: DIN, ASTM, GOST, GB, JIS, ANSI
Customized: Customized
Material: Alloy
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

China high quality Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc coupling

hrc coupling

Can HRC Couplings Accommodate High Torque and High-Speed Applications?

HRC (Highly Resilient Coupling) couplings are designed to handle a wide range of torque and speed requirements, making them suitable for various industrial applications, including those involving high torque and high-speed conditions. Their ability to accommodate high torque and high-speed applications depends on several factors:

  • Coupling Size and Type: HRC couplings come in various sizes and types, each with its torque and speed ratings. Larger couplings with robust designs can handle higher torque and speed than smaller ones.
  • Material Composition: HRC couplings consist of a metal hub and a flexible elastomeric element. The material composition of the elastomer plays a significant role in determining the coupling’s torque and speed capabilities.
  • Elastomer Properties: The elastomeric element in HRC couplings provides flexibility and damping. It should be selected based on its resilience, durability, and ability to withstand the intended torque and speed requirements.
  • Application Requirements: The coupling’s torque and speed ratings must match or exceed the demands of the application. Factors such as the driven and driving equipment’s power, load characteristics, and operational conditions should be considered.
  • Proper Installation: Correct installation, including accurate alignment and proper torqueing of the coupling, ensures optimal performance and minimizes the risk of premature failure in high torque and speed applications.

It’s important to consult the manufacturer’s specifications and guidelines to select the appropriate HRC coupling for a specific high torque and high-speed application. Using an undersized or unsuitable coupling can lead to premature wear, reduced efficiency, and potential safety hazards.

In summary, HRC couplings are well-suited for high torque and high-speed applications when properly selected, installed, and maintained. They offer the benefits of damping vibrations, shock absorption, and misalignment compensation while reliably transmitting power in demanding industrial settings.

hrc coupling

What Industries Commonly Use HRC Couplings for Power Transmission?

HRC (Highly Resilient Coupling) couplings are widely used in various industries for power transmission applications. Some of the common industries where HRC couplings are utilized include:

1. Manufacturing Industry: HRC couplings are extensively used in manufacturing plants for powering various machinery such as conveyor systems, pumps, compressors, fans, and machine tools. Their ability to dampen vibrations and accommodate misalignment makes them suitable for a range of manufacturing processes.

2. Petrochemical Industry: The petrochemical industry often employs HRC couplings in pumps, blowers, and agitators used for processing and transporting various chemicals and petrochemical products. These couplings help ensure smooth power transmission and protect equipment from shocks and vibrations.

3. Mining Industry: In the mining sector, HRC couplings are used in crushers, mills, conveyor belts, and other heavy-duty equipment. They are chosen for their durability and ability to handle high torque loads, which are common in mining operations.

4. Water and Wastewater Treatment: Water treatment plants and wastewater facilities utilize HRC couplings in pumps, mixers, and aerators to efficiently move and treat water and sewage. The couplings’ shock absorption capability helps reduce wear and tear on the equipment.

5. Power Generation: Power plants, both conventional and renewable, often use HRC couplings in generators, turbines, cooling tower fans, and other critical equipment. The couplings’ ability to handle high torque and dampen vibrations is beneficial in power generation applications.

6. Paper and Pulp Industry: In paper mills and pulp processing facilities, HRC couplings are employed in various stages of the manufacturing process, including pumps, agitators, and roll drives. They contribute to efficient power transmission and minimize downtime.

7. Steel and Metal Industry: The steel and metal processing industry relies on HRC couplings in rolling mills, furnaces, and other heavy machinery. These couplings assist in transmitting power effectively while absorbing shock loads and accommodating misalignment.

These are just a few examples, and HRC couplings find applications in numerous other industries, such as food and beverage, automotive, chemical, and construction, where reliable power transmission and protection of connected equipment are essential.

hrc coupling

Limitations and Disadvantages of Using HRC Couplings

HRC couplings offer numerous advantages for power transmission in various mechanical systems, but they also have some limitations and disadvantages to consider:

  • Misalignment Limitation: While HRC couplings can handle a degree of misalignment, they are not as flexible as some other coupling types, such as flexible or elastomeric couplings. Excessive misalignment beyond their specified limits can lead to premature wear and failure.
  • High Shock Loads: While HRC couplings can handle moderate shock loads, they may not be suitable for applications with very high shock loads. In such cases, specialized couplings like gear or disc couplings may be more appropriate.
  • Temperature Limitations: HRC couplings have temperature limitations based on the material used in their construction. In high-temperature environments, other coupling types, such as metal disc couplings, may be more suitable.
  • Noise and Vibration: HRC couplings are not as effective in dampening noise and vibration as some other coupling designs, like flexible couplings with elastomeric elements. In applications where noise reduction is critical, additional measures may be required.
  • Regular Maintenance: While HRC couplings are generally low-maintenance, they still require periodic inspection and lubrication to ensure optimal performance and prevent unexpected failures.
  • Component Wear: The flexible elements of HRC couplings, such as the rubber inserts, may experience wear over time, especially in demanding applications. Regular inspection and replacement of these elements may be necessary.
  • Size and Weight: HRC couplings may be larger and heavier than some other coupling types, which can be a consideration in applications where space and weight are limited.
  • Cost: HRC couplings can be more cost-effective than some high-performance couplings, but they may not offer the same level of performance and precision in certain applications.

Despite these limitations, HRC couplings remain a popular choice in many industrial applications due to their reliability, simplicity, and cost-effectiveness. Engineers and designers should carefully assess their specific application requirements and consider these factors when selecting the most suitable coupling type for their system.

China high quality Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc couplingChina high quality Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling  hrc coupling
editor by CX 2023-09-28

China OEM Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC hrc coupling

Product Description

Product Description

Chain coupling is composed by a duplex roller chain and 2 sprockets. The function of connection and detachment is done by the joint of chain. It has the characteristic of simplicity, high efficiency, easy – on and easy-off and nice out-look.
It also has a aluminium cover to prevent dust and protect the lubricant and make the life of chain coupling a long – lasting one

Detailed Photos

 

Product Parameters

 

 

Our Advantages

Company advantages:
Own Import & Export License, The TV trade mark registered successfully in many countries, Sales network spread all over China, Products export to 65 countries in 5 continents.

Membership:
1. The member of China General Machine Components Industry Association.
2. The member of China Chain Transmission Association.
3. The member of China Chain Standardization Association.
4. The member of China Agricultural Association Machinery Manufacturers.

With our excellent trained staffs and workers, advanced and efficient equipments, completely sales network, strict QA systems. You are confidence that our premium qualified chain can meet all customers’ specification and strictest quality standards.

WHY CHOOSE US

Comprehensive Product Portfolio We produce and supply a wide range of power transmission
products including drive chains, leaf chains, conveyor chains, agricultural chains, sprockets, and
couplings. This one-store-for-all shopping experience will significantly reduce your searching costs while
guarantee youfind what you want at 1 click.

Value Choice Products Our products are the best combination of quality and price, and you get what
you want within your budgets

Seasoned Sales Associates and Engineers We have 15 seasoned sales associates and 5 engineers;
on our team at your disposal any time when you need a helping hand. They are well trained with industry
know-now and will always respond to your requests within 24 hours.
100% Customer Retention Rate Our regular customers from overseas come back not just for our
premium quality products, but for the superior services that we’ve provided over the years.

FAQ

Q1: What’s your average lead time?
A: It varies. Our regular end-to-end lead time is 1-2 months.. We also provide express shipments for rush orders. For details,please consult our sales associate.

Q2: Is your price better than your competitors given the same quality?
A: Definitely YES. We provide the most competitive price in the power transmission industry. If price disparity exists, we’ll be more than happy to do a price match.
Q3: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q4: Can we inspect the goods before shipment?
A: Yes. You or your representative or any third-party inspection party assigned is allowed access to our facility and do the inspection.

Q5: What kind of payment method is acceptable for your mill?
A: We’re flexible. We take T/T, L/C, or any other online payment methods so long as it’s applicable for you.

Q6: What if I have any other questions?
A: Whenever in doubt, you’re always encouraged to consult our sales associate any time – They will help you to your satisfaction.

 

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Bore Diameter: 6mm
Speed: 4000r/M
Structure: Flexible
Material: Cast Steel
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

China OEM Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC  hrc coupling

hrc coupling

How Does an HRC Coupling Protect Connected Equipment from Shock Loads and Vibrations?

HRC (Highly Resilient Coupling) couplings are designed to protect connected equipment from shock loads and vibrations through their unique construction and material properties:

  • Flexible Elastomeric Element: The key component of an HRC coupling is the flexible elastomeric element positioned between the two metal hubs. This elastomer acts as a mechanical buffer, capable of absorbing and dissipating shock loads and vibrations that may occur during operation.
  • Damping of Vibrations: The elastomeric element’s flexibility allows it to dampen torsional vibrations and dampen the impact of sudden shock loads. This helps in reducing resonance effects and minimizing the transmission of vibrations to the connected equipment.
  • High Resilience: HRC couplings are made from elastomers with high resilience, meaning they can deform under load and return to their original shape after the load is removed. This property enables them to absorb and dissipate energy, protecting the system from sudden shocks.
  • Misalignment Compensation: In addition to shock and vibration absorption, HRC couplings can also compensate for small amounts of misalignment between shafts. This capability further enhances the protection of connected equipment by reducing the stress caused by misalignment.

When equipment experiences shock loads or vibrations, the elastomeric element flexes and compresses, acting as a shock absorber. This prevents the sudden transmission of high impact forces to the connected machinery, reducing the risk of damage and premature wear.

Moreover, by damping vibrations, HRC couplings improve the overall stability and smoothness of the power transmission system. This contributes to the longevity of connected equipment and reduces the likelihood of mechanical failures or downtime.

Overall, HRC couplings play a vital role in safeguarding connected equipment from shock loads and vibrations, promoting the reliability and performance of mechanical systems in various industrial applications.

hrc coupling

What Industries Commonly Use HRC Couplings for Power Transmission?

HRC (Highly Resilient Coupling) couplings are widely used in various industries for power transmission applications. Some of the common industries where HRC couplings are utilized include:

1. Manufacturing Industry: HRC couplings are extensively used in manufacturing plants for powering various machinery such as conveyor systems, pumps, compressors, fans, and machine tools. Their ability to dampen vibrations and accommodate misalignment makes them suitable for a range of manufacturing processes.

2. Petrochemical Industry: The petrochemical industry often employs HRC couplings in pumps, blowers, and agitators used for processing and transporting various chemicals and petrochemical products. These couplings help ensure smooth power transmission and protect equipment from shocks and vibrations.

3. Mining Industry: In the mining sector, HRC couplings are used in crushers, mills, conveyor belts, and other heavy-duty equipment. They are chosen for their durability and ability to handle high torque loads, which are common in mining operations.

4. Water and Wastewater Treatment: Water treatment plants and wastewater facilities utilize HRC couplings in pumps, mixers, and aerators to efficiently move and treat water and sewage. The couplings’ shock absorption capability helps reduce wear and tear on the equipment.

5. Power Generation: Power plants, both conventional and renewable, often use HRC couplings in generators, turbines, cooling tower fans, and other critical equipment. The couplings’ ability to handle high torque and dampen vibrations is beneficial in power generation applications.

6. Paper and Pulp Industry: In paper mills and pulp processing facilities, HRC couplings are employed in various stages of the manufacturing process, including pumps, agitators, and roll drives. They contribute to efficient power transmission and minimize downtime.

7. Steel and Metal Industry: The steel and metal processing industry relies on HRC couplings in rolling mills, furnaces, and other heavy machinery. These couplings assist in transmitting power effectively while absorbing shock loads and accommodating misalignment.

These are just a few examples, and HRC couplings find applications in numerous other industries, such as food and beverage, automotive, chemical, and construction, where reliable power transmission and protection of connected equipment are essential.

hrc coupling

Selection of HRC Coupling for Specific Applications

Choosing the appropriate HRC coupling for a specific application requires careful consideration of several factors. Here are the steps to select the right HRC coupling:

  1. Identify Application Requirements: Understand the specific requirements of your application, including torque and speed requirements, operating environment, shaft misalignment, and space limitations.
  2. Calculate Torque and Speed: Determine the torque and speed values required for your application. This information will help you select an HRC coupling that can handle the expected load and rotational speed.
  3. Consider Misalignment: Evaluate the type and magnitude of misalignment that the coupling needs to accommodate. HRC couplings can handle angular, parallel, and axial misalignment to varying degrees, so choose a design that meets your misalignment needs.
  4. Check Space Constraints: Consider the available space for the coupling. If space is limited, you may need a compact HRC design or consider other coupling types that require less space.
  5. Choose Hub Material: Select the hub material based on the application environment. Standard HRC hubs are usually made of cast iron, but stainless steel or other materials may be necessary for corrosive or specialized applications.
  6. Explore Design Variations: Evaluate the various HRC coupling designs available, such as standard, spacer, flywheel, taper lock, brake drum, etc. Choose a design that best suits your application’s needs.
  7. Consider Environmental Factors: If your application operates in harsh conditions, consider factors such as temperature, moisture, chemicals, and potential contamination when choosing the HRC coupling.
  8. Check Installation and Maintenance: Consider the ease of installation and maintenance requirements of the selected HRC coupling. Some designs, such as taper lock or pilot bore, offer easier installation and removal.
  9. Consult Manufacturer Recommendations: Consult with the coupling manufacturer or a knowledgeable supplier to ensure you select the right HRC coupling for your specific application. They can provide valuable insights and recommendations based on their expertise.

By carefully evaluating these factors and selecting the appropriate HRC coupling, you can ensure optimal performance, reliability, and longevity for your mechanical system.

China OEM Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC  hrc couplingChina OEM Mh Pin Shaft Universal Steel Trailer Rigid Flexible Couplings Jaw HRC  hrc coupling
editor by CX 2023-08-04

China Huading Giiclz Type Drum Gear Coupling Steel Connection Parts Shaft Gear Couplings coupling episodes

Solution Description

 

Merchandise Description

GIICLZ Sort Drum Equipment Coupling(JB/T 8854.2-2001) 

Descriprion
GIICLZ drum-formed gear coupling has the relative offset efficiency of 2 axes compensated in a particular angle course and operates lengthy distances with the middle axle. It is ideal for connecting horizontal 2 coaxial traces with a specific angular displacement of the transmission shafting.

Features
one. Modest radial dimension and big bearing capacity are frequently used in shafting transmission beneath minimal speed and heavy load problems.
two. Below the exact same outer diameter of the inner gear sleeve and the greatest outer diameter of the coupling, the load-carrying potential of the drum-shaped equipment coupling is fifteen-20% greater than that of the straight-tooth coupling on average.
3. It can compensate for the relative offset of 2 axes at a particular angle and operate lengthy distances with the middle axle.
4. It is ideal for connecting horizontal 2 coaxial axes and driving shafting with a particular angle displacement.

Solution Parameters

Major Dimension and Parameter

Type
 
Nominal torque
(kN·m)
Allowable velocity
(R/min)
Shaft hole diameter Shaft hole duration D D1 D2 D3 C H A B e Rotary inertia
Kg.m2
Weight
d1 d2 Y J1type
GIICLZ1 .four 4000 thirty 35 eighty two sixty 103 71 seventy one fifty eight 2 eighteen 38 38 .005 four.one
GIICLZ2 .71 4000 25 28 62 44 a hundred and fifteen 83 eighty three 60 eight two 21 44 42 .00625 4.eight
GIICLZ3 one.twelve 4000 25 28 62 forty four 127 ninety five 95 75 8 2 22 forty five forty two .011 seven.eight
GIICLZ4 1.eight 4000 sixty three sixty five 142 107 149 116 116 ninety eight two 24.5 49 42 .039 sixteen.5
GIICLZ5 three.fifteen 4000 sixty three 65 142 107 167 134 134 a hundred and five 10 two.five 27.5 54 42 .5175 23.1
GIICLZ6 5 4000 eighty eighty five 172 132 187 187 187 153 ten 2.five 28 fifty five forty two .10425 35.4
GIICLZ7 7.1 3750 100 one zero five 212 167 204 a hundred and seventy a hundred and seventy one hundred forty ten two.five thirty fifty nine 42 .1898 fifty four.3
GIICLZ8 ten 3300 a hundred a hundred and ten 212 167 230 186 186 155 twelve three 33.5 seventy one forty seven .297 sixty seven.four
GIICLZ9 sixteen 3000 130 135 252 202 256 222 212 one hundred eighty 12 3 34.5 37 forty seven .575 104.4
GIICLZ10 22.four 2650 one hundred thirty a hundred forty five 252 202 287 239 239 two hundred fourteen three.5 39 eighty two forty seven .935 133.five
GIICLZ11 35.five 2350 160 one hundred seventy 302 242 325 250 250 235 14 three.5 forty.five 85 forty seven 1.625 193
GIICLZ12 fifty 2100 one hundred ninety 200 325 282 362 286 313 270 sixteen 4. forty four.five 95 forty nine three.093 290
GIICLZ13 71 1850 200 220 352 282 412 322 350 three hundred eighteen 4.five forty nine 104 forty nine 6.34 370
GIICLZ14 112 1650 240 250 470 330 462 420 335 380 22 5.5 86 148 sixty three eight.six 509
GIICLZ15 a hundred and eighty 1500 280 285 470 380 512 470 380 380 22 five.5 91 158 sixty three fifteen.575 740
GIICLZ16 250 1300 280 three hundred 470 380 580 522 430 430 28 seven 104.5 177 67 26.35 974
GIICLZ17 355 1200 250 260 410 330 644 582 490 28 seven 99 182 67 38.825 1110
GIICLZ18 five hundred 1050 340 360 550 450 726 658 540 28 eight 111 215 seventy five forty nine.five 1465
GIICLZ19 710 950 340 320 470 380 818 748 630 32 eight 116 220 seventy five 139.5 2457
GIICLZ20 1000 800 480 500 650 540 928 838 720 32 10.5 123.5 235 75 277.twenty five 3793
GIICLZ21 1400 750 480 five hundred 650 540 1571 928 810 forty eleven.five 127.5 245 75 435 4780
GIICLZ22 1800 650 670 680 900 780 1134 1036 915 forty 13 131 255 75 852.25 7540
GIICLZ23 2500 600 670 710 900 780 1282 1178 1030 50 fourteen.five 149.five 290 eighty 1638.75 11133
GIICLZ24 3550 550 800 850 1000 880 1428 1322 1175 fifty 16.5 158.5 305 eighty 2976.twenty five 16110
GIICLZ25 4500 460 a thousand 1040 1100 1644 1538 1390 fifty 19 162.5 310 80 7198.25 27797

Be aware:
The instant of inertia and mass are calculated according to and including J1 axial extension.
two. The axle gap dimension marked “*” in the axle gap diameter column is only relevant to d1 choice.
3. J1 shaft extension series is suggested.
four. The axle gap diameter with brackets is not used in the new design and style. 

 

♦Packaging & Delivery

♦Other Items List

Transmission Machinery 
Parts Title
Model
Common Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
Large Adaptable Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

 

Firm Profile

HangZhou CZPT Equipment Producing Co., Ltd. is a substantial-tech enterprise specializing in the layout and manufacture of different types of coupling. There are 86 staff in our business, like 2 senior engineers and no less than twenty mechanical style and manufacture, heat treatment method, welding, and other professionals.
Advanced and sensible procedure, full detection signifies. Our company actively introduce international innovative engineering and tools, on the basis of the condition, we make full use of the edge and do far more study and innovation. Rigorous to large good quality and function strictly in accordance with the ISO9000 quality certification method regular mode.
Our firm supplies different varieties of items. Substantial good quality and affordable price tag. We stick to the theory of “good quality 1st, support 1st, ongoing improvement and innovation to meet up with the buyers” for the administration and “zero defect, zero issues” as the good quality aim. 

 

 

Our Providers

one. Design Services
Our style staff has expertise in Cardan shafts relating to product layout and growth. If you have any needs for your new merchandise or want to make more advancements, we are here to offer our support.

2. Item Solutions
Uncooked materials → Chopping → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→ Packing→ Transport

3. Samples Process
We could create the sample according to your requirement and amend the sample constantly to satisfy your need to have.

four. Study & Growth
We generally study the new needs of the industry and create a new product when there is new vehicles in the market.

5. Quality Control
Every action should be a unique take a look at by Specialist Personnel in accordance to the regular of ISO9001 and TS16949.

FAQ

Q 1: Are you a trading firm or manufacturer?
A: We are a specialist maker specializing in manufacturing various sequence of couplings.

Q 2: Can you do OEM?
Sure, we can. We can do OEM & ODM for all the clients with personalized artworks in PDF or AI structure.

Q 3:How lengthy is your shipping time?
Normally, it is twenty-thirty days if the products are not in inventory. It is in accordance to quantity.

Q 4: Do you give samples? Is it free of charge or added?
Of course, we could supply the sample but not for totally free. Actually, we have a very great cost principle, when you make the bulk order the expense of the sample will be deducted.

Q 5: How extended is your warranty?
A: Our Warranty is twelve months under typical situation.

Q 6: What is the MOQ?
A: Typically our MOQ is 1 pcs.

Q 7: Do you have inspection techniques for coupling?
A: a hundred% self-inspection ahead of packing.

Q 8: Can I have a pay a visit to to your factory before the buy?
A: Certain, welcome to go to our factory.

Q 9: What is actually your payment?
A: T/T. 

Contact Us
World wide web: huadingcoupling
Incorporate: No.eleven HangZhou Road, Chengnan park, HangZhou Town, ZheJiang Province, China


/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Nonstandard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Type
 
Nominal torque
(kN·m)
Allowable speed
(R/min)
Shaft hole diameter Shaft hole length D D1 D2 D3 C H A B e Rotary inertia
Kg.m2
Weight
d1 d2 Y J1type
GIICLZ1 0.4 4000 30 35 82 60 103 71 71 50 8 2 18 38 38 0.005 4.1
GIICLZ2 0.71 4000 25 28 62 44 115 83 83 60 8 2 21 44 42 0.00625 4.8
GIICLZ3 1.12 4000 25 28 62 44 127 95 95 75 8 2 22 45 42 0.011 7.8
GIICLZ4 1.8 4000 63 65 142 107 149 116 116 90 8 2 24.5 49 42 0.039 16.5
GIICLZ5 3.15 4000 63 65 142 107 167 134 134 105 10 2.5 27.5 54 42 0.5175 23.1
GIICLZ6 5 4000 80 85 172 132 187 187 187 153 10 2.5 28 55 42 0.10425 35.4
GIICLZ7 7.1 3750 100 105 212 167 204 170 170 140 10 2.5 30 59 42 0.1898 54.3
GIICLZ8 10 3300 100 110 212 167 230 186 186 155 12 3 33.5 71 47 0.297 67.4
GIICLZ9 16 3000 130 135 252 202 256 222 212 180 12 3 34.5 37 47 0.575 104.4
GIICLZ10 22.4 2650 130 145 252 202 287 239 239 200 14 3.5 39 82 47 0.935 133.5
GIICLZ11 35.5 2350 160 170 302 242 325 250 250 235 14 3.5 40.5 85 47 1.625 193
GIICLZ12 50 2100 190 200 325 282 362 286 313 270 16 4.0 44.5 95 49 3.093 290
GIICLZ13 71 1850 200 220 352 282 412 322 350 300 18 4.5 49 104 49 6.34 370
GIICLZ14 112 1650 240 250 470 330 462 420 335 380 22 5.5 86 148 63 8.6 509
GIICLZ15 180 1500 280 285 470 380 512 470 380 380 22 5.5 91 158 63 15.575 740
GIICLZ16 250 1300 280 300 470 380 580 522 430 430 28 7 104.5 177 67 26.35 974
GIICLZ17 355 1200 250 260 410 330 644 582 490 28 7 99 182 67 38.825 1110
GIICLZ18 500 1050 340 360 550 450 726 658 540 28 8 111 215 75 49.5 1465
GIICLZ19 710 950 340 320 470 380 818 748 630 32 8 116 220 75 139.5 2457
GIICLZ20 1000 800 480 500 650 540 928 838 720 32 10.5 123.5 235 75 277.25 3793
GIICLZ21 1400 750 480 500 650 540 1022 928 810 40 11.5 127.5 245 75 435 4780
GIICLZ22 1800 650 670 680 900 780 1134 1036 915 40 13 131 255 75 852.25 7540
GIICLZ23 2500 600 670 710 900 780 1282 1178 1030 50 14.5 149.5 290 80 1638.75 11133
GIICLZ24 3550 550 800 850 1000 880 1428 1322 1175 50 16.5 158.5 305 80 2976.25 16110
GIICLZ25 4500 460 1000 1040 1100 1644 1538 1390 50 19 162.5 310 80 7198.25 27797

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Nonstandard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Type
 
Nominal torque
(kN·m)
Allowable speed
(R/min)
Shaft hole diameter Shaft hole length D D1 D2 D3 C H A B e Rotary inertia
Kg.m2
Weight
d1 d2 Y J1type
GIICLZ1 0.4 4000 30 35 82 60 103 71 71 50 8 2 18 38 38 0.005 4.1
GIICLZ2 0.71 4000 25 28 62 44 115 83 83 60 8 2 21 44 42 0.00625 4.8
GIICLZ3 1.12 4000 25 28 62 44 127 95 95 75 8 2 22 45 42 0.011 7.8
GIICLZ4 1.8 4000 63 65 142 107 149 116 116 90 8 2 24.5 49 42 0.039 16.5
GIICLZ5 3.15 4000 63 65 142 107 167 134 134 105 10 2.5 27.5 54 42 0.5175 23.1
GIICLZ6 5 4000 80 85 172 132 187 187 187 153 10 2.5 28 55 42 0.10425 35.4
GIICLZ7 7.1 3750 100 105 212 167 204 170 170 140 10 2.5 30 59 42 0.1898 54.3
GIICLZ8 10 3300 100 110 212 167 230 186 186 155 12 3 33.5 71 47 0.297 67.4
GIICLZ9 16 3000 130 135 252 202 256 222 212 180 12 3 34.5 37 47 0.575 104.4
GIICLZ10 22.4 2650 130 145 252 202 287 239 239 200 14 3.5 39 82 47 0.935 133.5
GIICLZ11 35.5 2350 160 170 302 242 325 250 250 235 14 3.5 40.5 85 47 1.625 193
GIICLZ12 50 2100 190 200 325 282 362 286 313 270 16 4.0 44.5 95 49 3.093 290
GIICLZ13 71 1850 200 220 352 282 412 322 350 300 18 4.5 49 104 49 6.34 370
GIICLZ14 112 1650 240 250 470 330 462 420 335 380 22 5.5 86 148 63 8.6 509
GIICLZ15 180 1500 280 285 470 380 512 470 380 380 22 5.5 91 158 63 15.575 740
GIICLZ16 250 1300 280 300 470 380 580 522 430 430 28 7 104.5 177 67 26.35 974
GIICLZ17 355 1200 250 260 410 330 644 582 490 28 7 99 182 67 38.825 1110
GIICLZ18 500 1050 340 360 550 450 726 658 540 28 8 111 215 75 49.5 1465
GIICLZ19 710 950 340 320 470 380 818 748 630 32 8 116 220 75 139.5 2457
GIICLZ20 1000 800 480 500 650 540 928 838 720 32 10.5 123.5 235 75 277.25 3793
GIICLZ21 1400 750 480 500 650 540 1022 928 810 40 11.5 127.5 245 75 435 4780
GIICLZ22 1800 650 670 680 900 780 1134 1036 915 40 13 131 255 75 852.25 7540
GIICLZ23 2500 600 670 710 900 780 1282 1178 1030 50 14.5 149.5 290 80 1638.75 11133
GIICLZ24 3550 550 800 850 1000 880 1428 1322 1175 50 16.5 158.5 305 80 2976.25 16110
GIICLZ25 4500 460 1000 1040 1100 1644 1538 1390 50 19 162.5 310 80 7198.25 27797

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Understanding the Different Types of Couplings

A coupling is a device that joins two rotating shafts together. It transmits power from one to the other and is designed to allow some amount of end-movement and misalignment. It is a simple mechanism that is extremely common in many industries. Learn more about couplings in this article.

Flexible coupling

When choosing the correct flexible coupling for your application, there are several factors to consider. One of the most important factors is backlash, which is the amount of rotational play introduced by moving parts. Other factors to consider include lubrication and accessibility for maintenance. Choosing the right flexible coupling can be challenging, but it is possible to find the right fit for your specific application.
A flexible coupling is an excellent choice for applications that require high alignment accuracy, which is essential for reliable system performance. These couplings can compensate for angular and parallel misalignment, ensuring proper positioning between the driving and driven shafts. In addition, flexible couplings are more affordable than most traditional couplings.
The most common flexible coupling is the elastomeric type, which uses a resilient material to transmit torque. These couplings can be made of plastic or rubber. In either case, they can be relatively lightweight compared to other types of couplings. Elastomeric couplings can also be used for high-speed applications.
Another important factor to consider when selecting the best Flexible Coupling is the pipe you’re connecting. Some couplings are easier to install than others, and some even have tapered edges to make them slide easily on the pipe. Regardless of the choice you make, it’s crucial to remember that proper installation is critical for reliability and safety.
gearbox

CZPT coupling

An CZPT coupling is a flexible, mechanical coupling that features a high degree of angular misalignment and eccentricity. They are available in different lengths, with MOL being the longest. They are ideal for applications that involve high parallel misalignment, limited assembly access, electrical insulation, and other conditions.
CZPT couplings are a versatile type of coupling, and they are often used to connect parallel shafts. They work by transmitting torque from one to the other using the same speed and rotation mechanism. They are available in various materials, including aluminum, brass, and polymers. In addition, they can work under high temperatures.
One of the main benefits of using an CZPT coupling is the fact that it does not require the use of a gearbox. These couplings are flexible, and their design allows them to cope with misalignment problems that may occur in power transmission applications. They are also able to absorb shock.
Another advantage of CZPT couplings is that they are suitable for systems with low-to-medium amounts of shaft misalignment. Because their friction is limited to the surface of the hubs, they are able to accommodate low bearing loads. CZPT couplings can also be used in systems with limited shaft access, since the disks are easily removed.

Clamped coupling

Clamped couplings are designed to provide a high-strength connection between two objects. A standard coupling has two parts: a nipple and a clamp sleeve. Each part is designed in such a way as to cooperate with each other. The sleeve and clamp are made of rubber. A reinforcing braid is often used to protect the exposed steel braid from rusting.
PIC Design provides a wide variety of standard clamping couplings for many different industries. These include medical, dental, military, laboratory, and precision industrial control equipment. They have a simple design that makes them ideal for these applications. Clamped couplings are also available for custom manufacturing. These couplings are available in metric, inch, and Metric.
The most common type of clamp coupling is a hose clamp. This type of coupling is used to connect two hoses or piping units. It consists of two conical binding sleeves that fit into the ends of the two parts. The coupling is then tightened with a screwdriver. It’s a versatile coupling because it allows two piping units or hoses to be joined together.
Another type of clamp coupling is the two-piece clamp coupling. The two-piece design allows for a quick and easy installation. Unlike other types of couplings, the clamp coupling is not necessary to remove the bearings before installing it. Its keyway is designed with shims in place so that it fits over the shaft. These couplings are available in different sizes, and they are made of steel or dutile iron.
gearbox

Helicoidal coupling

Helicoidal coupling is a form of nonlinear coupling between two molecules. It occurs when the molecules in a double helix are subjected to oscillations. These oscillations can occur either in the right or left-handed direction. These oscillations are called solitons. Helicoidal coupling can provide quantitative or qualitative support to a structure, such as an electron.

Split Muff coupling

The Split-Muff Coupling market report provides detailed market analysis and key insights. The study covers the market size, segmentation, growth and sales forecast. It also examines key factors driving the market growth and limiting its development. The report also covers current trends and vendor landscapes. Therefore, you can get a deep understanding of the Split-Muff Coupling industry and make the right business decisions.
The report also provides data on the competitive landscape and the latest product and technology innovations. It also provides information on market size, production and income. It also covers the impact of the COVID-19 regulations. The market report is a valuable resource for companies looking to expand their businesses, or to improve existing ones.
In terms of application, Split-Muff Couplings can be used in light to medium duty applications. They are shaped like a semi-cylindrical disc that fits over a shaft. Both parts are threaded for assembly and disassembly. It can be disassembled easily and quickly, and can be used for medium to heavy-duty applications with moderate speeds.
Split Muff couplings are the most popular type of couplings for transferring wet and abrasive materials. Their flanged end fits on most major brands of smooth material muff hoses. In addition, this type of coupling is corrosion-resistant and easy to install. It also does not require any adjustments to the drive shaft’s position.
gearbox

Flexible beam coupling

The Flexible beam coupling is one of the most popular types of couplings in the industry. It is comprised of two sets of parallel coils separated by a solid member, and it offers a wide range of torsional stiffness. These couplings are made of aluminum alloy or stainless steel. They offer excellent flexibility and are less expensive than many other types of couplings. They also require zero maintenance and can tolerate shaft misalignment.
Beam couplings are categorized into two types: helical and axial. The former is characterized by a high degree of flexibility, while the latter is used to compensate for higher misalignment. Both types are suitable for small torque applications and are available in a wide range of shaft sizes.
Flexible beam couplings are available in metric and US sizes, and feature a variety of options. They feature stainless steel or aluminum materials and are highly durable and corrosion-resistant. They also offer high torque capacities and excellent fatigue resistance. Flexible beam couplings are available with a wide range of options to meet your unique application needs.
China Huading Giiclz Type Drum Gear Coupling Steel Connection Parts Shaft Gear Couplings     coupling episodesChina Huading Giiclz Type Drum Gear Coupling Steel Connection Parts Shaft Gear Couplings     coupling episodes
editor by CX 2023-03-31

China GCLD drum shape gear coupling 45# steel rigid shaft connection Professional Customized Coupling Manufacturer High Speed brass coupling

Error:获取返回内容失败,
Your session has expired. Please reauthenticate.

Types of Coupling

A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.

Flexible beam coupling

Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.
gearbox

Magnetic coupling

Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.

Shaft coupling

A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
gearbox

Overload safety mechanical coupling

Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
gearbox

CZPT Pulley

The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
China GCLD drum shape gear coupling 45# steel rigid shaft connection Professional Customized Coupling Manufacturer High Speed     brass couplingChina GCLD drum shape gear coupling 45# steel rigid shaft connection Professional Customized Coupling Manufacturer High Speed     brass coupling
editor by czh 2023-03-17

OEM wholesaler made in China – replacement parts – pto output Custom CNC Machining Steel Pto Spline Shaft with High Quality with ce certificate top quality low price

We – EPG Group the largest agricultural gearbox and pto factory in China with 5 distinct branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

OEM  wholesaler  made in China - replacement parts -  pto output Custom CNC Machining Steel Pto Spline Shaft with High Quality with ce certificate top quality low price

pto shaft lock pin substitution tractor pto shaft rates EPG how to prolong pto shaft is kubota tractor pto shaft seal specialized eliminating pto shaft guard in extensive angle pto shaft style, tractor pto shear pin producer 2003 lexus rx300 drive shaft and vw polo push shaft cost product sales pto shaft greatest angle of agricultural machinery and farm implements, which has an independent import and export legal rights. It is our aim to offer a extensive variety of top quality items at inexpensive costs, give the greatest service for customers pleased and add to our ongoing advancement.

OEM Customized CNC Machining Metal Pto Spline Shaft with High high quality

We specialised in precision areas and elements machining to serve the electronics, automotive components, astronautical components, health-related appliances and hand instrument industries. And  commonly assortment of design and manufacturing such as customized cnc machining, cnc machined elements, non-stHangZhourd machine parts, machined casting parts and precision turned elements that the materia EPT of hardware components are in steel, stainless steel, brass, aluminum and plastic.
if you have EPT need about the parts substance, tolerance, process, remedy,
products or take a look at, this sort of as seamless copper fin tubing, aluminum alloy 535 casting, and
glass-lined alloy casting, EPT paint painting, 5 axis centers, 3D Coordinate
Measurement Devices (CMM) check … just really feel free to make contact with us, we will try our very best to
meet the needs of you.

Market Concentrate Appliance/ Automotive/ Agricultural Electronics/ Industrial/ Marine Mining/ Hydraulics/ Valves Oil and Fuel/ Electrical/ Construction

Added Capabilities CAD Style Providers CAM Programming Solutions Coordinate Measuring Machines (CMM) Reverse Engineering

Specification TS16949 accredited OEM PTO spline adapter, spline shaft adapter
Material Stainless metal, copper, brass, carbon steel, aluminum
(in accordance to customer’s prerequisite.
Surface area Treatment Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying,
the warmth disposing, sizzling-dip galvanizing, black oxide coating, painting, powdering, colour zinc-plated,
blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing and so forth.
Main Goods Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,gear, stamping components,washer,gasket,
plastic molding injection areas,
standoff,CNC machining service,add-ons and many others.
Generating Equipment CNC device , automatic lathe machine,stamping equipment,CNC milling device,rolling machine,lasering,tag grinding device and many others.
Administration Method ISO9001 – 2008
Available Certificate RoHS, SGS, Materials Certification
Testing Equipment Projecting equipment, Salt Spray Take a look at, Durometer, and Coating thickness tester , 2nd projector
Direct time ten-fifteen doing work times as typical,It will based mostly on the comprehensive buy amount.
Managing Returned Merchandise With high quality difficulty or deviation from drawings
Shipping of Samples By DHL,Fedex,UPS, TNT,EMS^^
Guarantee Substitute at all our value for rejected merchandise
Major Marketplaces North America, South The united states, Eastern Europe , West Europe , North Europe, South Europe, Asia
How to order * You send out us drawing or sample
* We have by means of task assessment
* We give you our design for your confirmation
* We make the sample and send out it to you soon after you verified our design
* You affirm the sample then place an order and shell out us 30% deposit
* We start off creating
* When the products is completed, you pay out us the harmony soon after you verified photos or tracking numbers.
* Trade is completed, thank you!!
Apps Toy,Automotive, instrument, electrical equipment, household appliances, household furniture, mechanical equipment,
every day residing gear, electronic sporting activities products, mild business products, sanitation machinery,
industry/ hotel products provides, artware and so on.

FAQ

Q1:How to promise the High quality of Industrial Elements?

A1:we are ISO 9001-2008 accredited organization. we have the integrated method for industrial areas quality management. We have IQC (incoming high quality management), IPQCS (in procedure top quality manage section), FQC (final high quality control) and OQC (out-heading high quality manage) to management every process of industrial elements prodution.

Q2:What’s the Gain of Your Parts for Business Items?

A2:Our advantage is the competitive rates, f EPT shipping and large high quality. Our staff are responsible-oriented, welcoming-oriented,and dilient-oriented. our Industrial parts products are featured by stringent tolerance, smooth end and extended-existence efficiency.

Q3:what are our machining equipmengts?

A3:Our machining equipments incorporate CNC milling equipment, CNC turning equipment, stamping machines,hobbing machines, automated lathe equipment, tapping equipment, grinding devices, screw equipment, reducing devices and so on.

This fall: What shipping and delivery techniques our use?

A4:Generally speaking, we will use UPS or DHL to ship the goods. Our clients can get to the merchandise in 3 times.If our consumers do not want them urgently, we will also use Fedex and TNT.If the products are of large weight and big volumn, we will ship them by sea. This way can help save our buyers a good deal of money.

Q5:Who are our major buyers?

A5:HP, Samsung, Jabil Team,Lexmark,Flextronic Team.

Q6:What materia EPT can you handle?

A6:Brass,bronze,copper,stainless metal, steel,aluminum,titanium And plastic.

Q7:How Prolonged is the Shipping for Your Industrial Component?

A7:Usually speaking, it will take us fifteen working times for machining areas and 25 functioning days for the for stamping areas items. But we will shorten our lead time in accordance to customers’ requires if we are able to.

OEM  wholesaler  made in China - replacement parts -  pto output Custom CNC Machining Steel Pto Spline Shaft with High Quality with ce certificate top quality low price

Best China manufacturer & factory factory manufacturer for stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear With high quality best price

Best China manufacturer & factory factory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear With high quality best price

We also can design and make non-standard products to meet customers’ special requirements.

Overview

Quick Details

Applicable Industries:

Manufacturing Plant

Our factory has obtained the certificate of China’s Farm Machinery Products Quality Authentication promulgated by the Farm Machinery Products Quality Authentication Centre of China. Local Service Location:

None

Application:

Mechanical Equipment

Surface treatment:

Polishing

Processing:

Turning

Tolerance:

Customer’s Drawing Request

Heat treatment:

High Frequency Induction Hardening

Certificate:

ISO9001:2009/TS 16949

Service:
BREATHER DESIGN Although there are dozens of stock breathers and vent plugs on the market, EPT testing found none to be totally effective under all operating conditions. Variables such as input/output speed, direction of rotation, oil level and viscosity, and reducer mounting position all affect breather performance.

24 Hours Online

Supply Ability

Supply Ability:
5000 Piece/Pieces per Month

Packaging & Delivery

Packaging Details
Neutral paper packaging,wooden boxes for outer box or according to customer demand
Port
shanghai Port/Ningbo Port
Lead Time
:
Quantity(Pieces) 1 – 1000 >1000
Est. Time(days) 15 To be negotiated

Online Customization

We Ever-Power Group with 4 branches over 1200 workers is one of the biggest transmission parts and machining items manufacturers in China factory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear

Product Description:

We specialized in manufacturing automobile gears , motorcycle gears, gearbox, special vehicle (power takeoff, snowmobiles, engineering vehicles) gears, generator accessories, stainless steel ice cruAre you searching for a PTO water pump or PTO- driven generator? Hundreds of PTO parts from EPG mean you can find PTO shaft parts and accessories for whatever kind of equipment you’re working with. From PTO drive shafts to shield parts, we have dozens of replacement PTO parts. We stock Eurocardan parts as well as Neapco parts because those are names you can trust. Whether you need flex couplers or PTO shaft assemblies, we can help.sher etc.

Material

  1020,1045,20CrMnTi, etc.

Machining Process

Gear Hobbing , Gear Shaping,  Gear Shaving, Gear Grinding

Modules

1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5….8.0 etc.

Heat Treatment

Carburizing & Quenching,  Carbonitriding

Standard

DIN, ISO/GB, AGMA, JIS,ISO/TS16949:2009

factory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gearfactory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear 

Best China manufacturer & factory factory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear With high quality best price

Best China manufacturer & factory factory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear With high quality best price

Best China manufacturer & factory factory manufacturer for  stainless steel straight bevel gear transmission aluminum steel gear internal shaft gear With high quality best price

Best China manufacturer & factory Stainless steel cnc turning parts roller shaft bearing With high quality best price

Best China manufacturer & factory Stainless steel cnc turning parts roller shaft bearing With high quality best price

we supply chromed bar and tubes for hydualic and pheumatic cylinders, pto shaft, agricultural gearboxes etc.

Overview

Quick Details

Applicable Industries:

Manufacturing Plant

Brand Name:

OEM

OEM Service:

Support

Tolerance:

0.01-0.05mm or Customized

Certification:

ISO9001, SGS

If the gear reducer had to be painted, the detents must be covered to prevent them from drying and losing their seal. The machine work of the fittings set up in the output shafts need an ISO H7 or h6 margin for the hollow shaft. Surface Treatment:

Sandblasting,Polishing,Anodize, Zinc,Nickel,Chrome,Plating, etc.

Application:

Automobile,Medical Equipments,Electric Appliance,Hardware,etc.

Dimension:

As Customers’ Request

Equipment:

Milling/Lathe/Drilling/Four/Three Axis CNC Machining Center

Drawing Format:

PRO/E, Auto CAD, Solid Works,IGS,UG, CAD/CAM/CAE

Supply Ability

Supply Ability:

The company covering 88,000 square meters, has advanced equipment and strong technical strength, such as the numerical control machine tools and machining centers, CAD/CAM system, industrial robot etc.

10000 Piece/Pieces per Month

Packaging & Delivery

Port
nb
Lead Time
:
Quantity(Pieces) 1 – 500 >500
Est. Time(days) 30 To be negotiated

Online Customization

Stainless steel cnc turning parts roller shaft bearing

Product Description

 

 Product Type  CNC turning, milling, drilling, grinding, wire EDM cutting etc.
 Our Services  CNC Machining,Plastic Injection,Stamping,Die Casting,Silicone And   Rubber,Aluminum Extrusion,Mould Making,etc
 Material  AluminHow Can You Be Safe When Using PTO Shafts? First, make sure the shaft is shielded. This includes the driveline shield that covers the implement driveline, and the master shield which covers the universal joint and PTO stub shaft on the tractor.Maintain the shield so it can work for you. PTO driveline shields are usually mounted on bearings, so they need to be maintained. always REPLACE the shield when it is damaged or missing.Next, keep a safe distance from it when in use. Keep others away, too. How far? A distance of twice your height is a good start.Allow only those who absolutely must be in the area to be there. Keep all children away!Always pay attention to what is happening. Most PTO victims were caught by surprise.If something goes wrong — stop the machinery; take the PTO out of gear, stop the engine and set the brake. Put the keys in your pocket before working on the machinery.When stopping the machinery for any reason — end of work, lunch, repairs, or communication — take the PTO out of gear, stop the engine and set the brake.Road planers, dredges, and other equipment require power from some sort of engine in order to perform their designed function. Without a power take off, it would be necessary to add a second engine to provide the power necessary to run hydraulic pumps and other driveline attached equipment.um,Brass,Stainless Steel,Copper,Plastic,Wood,Silicone,Rubber,Or as per the   customers’ requirements
 Surface Treatment

 Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk   Printing,Brushing,Polishing,Laser Engraving

 Dimension   As customers’ request
 Service Project  To provide production design, production and technical service, mould development   and processing, etc
 Drawing Format:  PRO/E,  Auto CAD,  Solid Works,IGS,UG, CAD/CAM/CAE
 Testing Machine  Digital Height Gauge, caliper, Coordinate measuring machine, projection machine,   roughness tester, hardness tester and so on
 Industry used  Machinery; heavy duty equipment; electronic device; Auto spare parts; optical     telecommunication
 Packing  Eco-friendly pp bag / EPE Foam /Carton boxes or wooden boxes 
 As customer’s specific requirements
 Trial sample time  7-10 days after confirmation
 Delivery time  7-30 days after  receive the pre-payments
 Payment Terms  T/T,Western Union,Paypal

 

More service

Stainless steel cnc turning parts roller shaft bearing 

More Production Part

Stainless steel cnc turning parts roller shaft bearing

Surface Treatment

Stainless steel cnc turning parts roller shaft bearing 

Production Process

Why Us

Stainless steel cnc turning parts roller shaft bearingStainless steel cnc turning parts roller shaft bearingStainless steel cnc turning parts roller shaft bearingStainless steel cnc turning parts roller shaft bearing 

 

Best China manufacturer & factory Stainless steel cnc turning parts roller shaft bearing With high quality best price

Best China manufacturer & factory Stainless steel cnc turning parts roller shaft bearing With high quality best price

Best China manufacturer & factory Stainless steel cnc turning parts roller shaft bearing With high quality best price